Croduino Basic 2 avrdude stk500_getsync() not in sync: resp=0x0c

Soldered_Bot · April 6, 2018, 7:29pm

Customer:

I’m trying to upload a program to Arduino and getting this error:

Arduino: 1.8.5 (Windows 10), Board: “Arduino Duemilanove or Diecimila, ATmega328P”

Archiving built core (caching) in: C:\Users[user]\AppData\Local\Temp\arduino_cache_592402\core\core_arduino_avr_diecimila_cpu_atmega328_0c812875ac70eb4a9b385d8fb077f54c.a

Sketch uses 3012 bytes (9%) of program storage space. Maximum is 30720 bytes.

Global variables use 200 bytes (9%) of dynamic memory, leaving 1848 bytes for local variables. Maximum is 2048 bytes.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x0c

Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

Original message (Serbian)

POkusavam da uplodujem program u arduino i dobijam ovu gresku;

Arduino: 1.8.5 (Windows 10), Board: “Arduino Duemilanove or Diecimila, ATmega328P”

Archiving built core (caching) in: C:\Users[user]\AppData\Local\Temp\arduino_cache_592402\core\core_arduino_avr_diecimila_cpu_atmega328_0c812875ac70eb4a9b385d8fb077f54c.a

Sketch uses 3012 bytes (9%) of program storage space. Maximum is 30720 bytes.

Global variables use 200 bytes (9%) of dynamic memory, leaving 1848 bytes for local variables. Maximum is 2048 bytes.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x0c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x0c

Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

This report would have more information with

“Show verbose output during compilation”

option enabled in File → Preferences.

Originally submitted via email support on 6 April 2018. Migrated to the forum for community visibility.

Soldered_Bot · April 7, 2018, 7:07am

Soldered Support:

Which Croduino model is this? Can you provide a screenshot of all the settings in Arduino?

Original message (Serbian)

o kojem Croduinu se radi? Može screenshot svih postavki iz Arduina?

Soldered_Bot · April 15, 2018, 6:30pm

Customer:

I provided the previous email you requested.

Original message (Serbian)

Izgleda vam je promakao ovaj prethodni email koji ste trazili od mene.

[name removed]

Attachment omitted in migration: image.png

Soldered_Bot · April 16, 2018, 8:23am

Soldered Support:

Sorry about that. Here’s the answer:

Tools → Board should be Arduino Nano
Is Tools → Port set to the COM port with the highest number? (you have COM1, so there might be a COM port with a higher number)

You can also send us a screenshot from Device Manager showing the COM port, like in this guide: https://e-radionica.com/hr/blog/2015/10/09/croduino2-i-cp2102-driveri/#Windows

Original message (Serbian)

da, čini se da je sada vidimo pa evo odgovora:

Tools → Board bi trebao biti Arduino Nano
je li Tools → Port onaj s COM + najveća brojka (Vama je COM1 pa možda ima neki COM port s većom brojkom)

Možete nam poslati i screenshot iz Device Managera gdje se vidi taj COM port, kao na slici ovdje: https://e-radionica.com/hr/blog/2015/10/09/croduino2-i-cp2102-driveri/#Windows

Soldered_Bot · April 19, 2018, 2:56pm

Customer:

I changed it to Arduino Nano. COM 10 didn’t work and on COM 1 I got the same error.

I don’t know how to check those drivers in Windows 10, so if you could write out the steps for me.

Original message (Serbian)

Promenio sam na Arduino Nano, na COM 10 nije hteo a na COM 1 sam dobijao istu gresku.

Ne znam kako da pogledam one drajvere u WIndows 10 pa ako mozes da mi napises put.

Veliki pozdrav,

[name removed]

Soldered_Bot · April 19, 2018, 8:16pm

Soldered Support:

It sounds like COM10 should be the Croduino port.

Follow these instructions until you reach Device Manager and we can see what the problem is: https://www.computerhope.com/issues/ch000833.htm

Can you also try with a different USB cable while you’re at it?

Original message (Serbian)

Zvuči mi kao da bi COM10 trebao biti port Croduina.

Samo ove upute popratite dok ne dođete do Device Managera pa da tamo vidimo u čemu je problem: https://www.computerhope.com/issues/ch000833.htm

Možete li usput isto probati s drugim USB kabelom?

Soldered_Bot · April 20, 2018, 6:11pm

Customer:

COM 10 isn’t showing up. The Croduino wasn’t powered on when I took the screenshot.

Original message (Serbian)

Izgleda nema com 10, Croduino nije bio ukljucen kada sam uradio screen shoot

Attachment omitted in migration: image.png

Soldered_Bot · April 24, 2018, 5:00am

Soldered Support:

Have you used a Croduino on this computer before? So the drivers are already installed?Is this a new Croduino you haven’t used yet?

Original message (Serbian)

Na tom računalu ste već prije koristili neki Croduino? Dakle, driveri na njemu su instalirani?

Je li Vam to novi Croduino kojega još niste koristili?

Soldered_Bot · April 24, 2018, 9:43am

Customer:

I’ve been using this Croduino on this computer for several months and everything was working fine. It suddenly stopped uploading programs from Arduino IDE.

Original message (Serbian)

Taj Croduino koristim na ovom racunalu vec nekoliko meseci i sve je bilo OK, iz cista mira nije vise hteo da uploaduje progrem iz Arduino IDE

Soldered_Bot · April 26, 2018, 6:14am

Soldered Support:

I see that there’s no COM port. That’s the problem - either a driver issue (drivers were deleted or Windows Update changed something) or the board is physically damaged.

Best course of action in this situation is to try on another computer. Install the drivers and see if the serial port is detected.

Original message (Serbian)

vidim da nema COM porta, to je problem ili s driverima(obrisani/windows update je nešto radio s njima) ili je pločica fizički oštećena.

Najbolje probati na drugom računalu u ovoj situaciji. Instalirati drivere i vidjeti je li pronalazi serijski port.

Soldered_Bot · April 26, 2018, 9:47am

Customer:

I don’t have another computer. I’ll try reinstalling the FTDI drivers. Is that OK?

Original message (Serbian)

Davide,
nemem drugi racunar. Probacu ponovo da instaliram ftdi drivere. Jel to OK?

Soldered_Bot · April 26, 2018, 10:43am

Soldered Support:

You need CP2102 drivers, not FTDI: Soldered: Open-Source Electronics, Boards, Sensors & Modules – Soldered Electronics

Original message (Serbian)

trebaju Vam CP2102 driveri, ne FTDI: Soldered: Open-Source Electronics, Boards, Sensors & Modules – Soldered Electronics