Customer:
Can Dasduino boards be used in Visual Studio Code through the PlatformIO module? I’m specifically interested in the Dasduino Connect module.
Poštovani, da li je moguće koristiti Dasduino plocice unutar Visual Studio Code editora putem platformio modula.
Specifično me zanima Dasduino connect modul
Originally submitted via email support on 3 March 2023. Migrated to the forum for community visibility.
Soldered Support:
We don’t have official PlatformIO support, but since ESP8266 is supported, you can use the ESP8266 board definition - you’ll just need to manually define the pins for the user button and WS LED. In VS Code, you can use the Arduino extension for all our boards.
The Dasduino Connect contains an ESP8266, and all tutorials online about ESP8266 (NodeMCU, Wemos, etc.) apply to the Dasduino Connect as well.
Nažalost nemamo službenu podršku za platformio, ali kako je podržan ESP8266, možete koristiti board za ESP samo morate onda definirati ručno pin za user button i WS ledicu. Kada smo kod VS Code-a, možete koristiti Arduino ekstenziju za njega za sve naše pločice.
Na Dasduino Connect-u se nalazi ESP8266 i svi tutorijali na internetu koji se tiču ESP8266 (NodeMCU, Wemos, …) vrijede i za Dasduino Connect.
Customer:
I was able to get it working with your instructions. Can you tell me which LED is the bright one near the reset button?
Puno hvala, uspio sam prema vašim naputcima, dajte mi smao još javite koja je ono LED-ca blizu reset tipke koja „jako svjetli“.
Srdačan pozdrav
[name removed]
Senior Director, Science and New Technologies
Xellia d.o.o (Xellia Ltd)
[address removed]/6
10 000 Zagreb Croatia
Tel:
[phone removed]
Mob:
[phone removed]
[email removed]
Main partner of:
CONFIDENTIALITY NOTICE: The information transmitted hereby is intended only for the person(s) or entity(ies) to which it is addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination, copying or other use of this information, or taking of any action in reliance upon this information, by persons or entities other than the intended recipient(s) is prohibited. If you have received this communication in
error or without specific authorization, please contact the sender immediately by reply email and delete the materials and any copies from any computer. Please note that the sender of this e-mail and its attachments is solely responsible for its content if
it does not concern the operations of Xellia or its subsidiaries. Thank you.
P Consider the environment before printing this email.
Attachment omitted in migration: image301483.gif
Attachment omitted in migration: image352371.jpg
Soldered Support:
That’s a WS2812B in SMD version.
To je WS2812B u SMD verziji.